Leica DISTO E7400x | Laser Distance Meter
Technology Solutions for The Construction Industry

                A rugged laser distance meter for folks who get their hands dirty. 

                The Leica DISTO E7400x is a 9 measurement mode Laser Distance Meter (LDM)​ intended for use on active job sites. It features a precision laser module, a backlit LCD display, a tilt sensor, and a ruggedized chassis. 

                The E7400x has a 2 meter drop rating, doesn't mind getting dirty or wet, and is loaded with technology that makes it easy to get hard measurements, including:

                • Rough Openings: Metal tapes have a way of bending just as you almost get them into the far corner, making it difficult to measure the diagonal of a wide opening by yourself.

                • Obstacles: Straight measurements can be hard to get on active sites. Smart Horizontal allows you to shoot on an angle to get over or under obstacles, and then uses data from the tilt sensor to subtract the extra distance to arrive at the level horizontal measurement. Not only does the DISTO do all the math, you don't have to move a stack of drywall.

                With a range of up to 395', a small wobble in the tool can translate to the laser point bouncing in wide arcs on the target . For best results when measuring long distances, keep the dot steady with a tripod and a TA360 Tripod Adapter.

                Certified for Accuracy

                Features and Functions

                360° Tilt Sensor: Functions that need to know the angle of the DISTO when the shot is taken are enabled by a highly accurate 360° tilt sensor that determines the angle of the laser. These include Smart Horizontal and Height Tracking modes.

                Intelligent Endpiece: The endpiece is an integral part of the tool, connected to the circuit board. In the closed position the DISTO know to measure from its base. Flip it open 90° to align the base perfectly on an edge or corner. Flip it out all the way and you can put it in a corner to accurately measure diagonals. Otherwise, the width of the base would prevent you from getting all the way into the corner, rendering the measurement inaccurate.

                Height Tracking: "Real time" height tracking for situations where you can hit a reflective target (like the ground) on the low end, but not at the top. Perfect for measuring the height of an overhead wire, for example.

                Timer: Set a timer to delay a measurement the same way you would with the shutter on a digital camera.

                Accurate to 1/16 of an inch: That's right:A sixteenth of an inch! Take out a pair of earbuds. Look at how wide the 1/8" jack is. Now divide that by half.

                AND MORE! Min/Max Function, Stake Out Function, Painter Function, Add & Subtract, IP65, Pythagoras Function, Triangle/Room, Area/Volume, Memory Store 30 Displays, and Smart Horizontal Mode

                • ISO 16331-1 Certified Typical Measuring Accuracy: ± 0.04"
                • ISO 16331-1 Certified Typical Measuring Range: up to 395 ft
                • Unit Display Options: 0.000 m | 0.0000 m | 0.00 m | 0.00 ft | 0‘00‘‘ 1/32 | 0‘00‘‘ 1/16 | 0‘00‘‘ 1/8 | 0‘00‘‘ 1/4 | 0.00 in | 0 in 1/32 | 0 in 1/16 | 0 in 1/8 | 0 in 1/4
                • Power Range Technology
                • Protection Class: IP65 - water jet protection and dust-tight
                • Measurements Per Set of Batteries: up to 5000
                • Batteries: Type AAA 2 × 1.5 V
                • Pythagoras: 3 points, partial height
                • Memory: Last 20 displays
                • Illuminated Display

                Write a review

                Note: HTML is not translated!
                    Bad           Good

                DISTO E7400x

                • $279.00

                Related Products

                Target Plate GZM3

                Target Plate GZM3

                The Leica Geosystems GZM3 Target Plate is designed to improve the workflow of measuring templates an..