Read a target at distances that exceed your ability to see the laser point.
The Leica DISTO E7500i is a 14 measurement mode Laser Distance Meter (LDM) that is accurate to 1/16th of an inch. It is IP65 rated against dust, dirt and rain and features a point finder, a bright LCD screen, a 360° tilt sensor and Bluetooth Smart.
The E7500i laser module can read a target at distances that exceed your ability to see the laser point. With the point finder, a 4x zoom digital camera, you find your target in the display, extending the useable range to the ~650 ft max.
The farther you can shoot, the more potential there is for something to get in the way. Smart Horizontal allows you to shoot over obstacles so you can measure the level horizontal distance to your target.
At distance, a small wobble in the tool bounces the laser point in wide arcs. This is sub-optimal for acquiring reflected laser energy. For best results when measuring long distances, keep your dot steady with a tripod and our Fine Tune Adapter.
Produce the Most Accurate Claims Possible
Features and Functions
360° Tilt Sensor: Functions that need to know the angle of the DISTO when the shot is taken are enabled by a highly accurate 360° tilt sensor that determines the angle of the laser. These include Smart Horizontal and Height Tracking modes.
Intelligent Endpiece: The endpiece is an integral part of the tool, connected to the circuit board. In the closed position the DISTO know to measure from its base. Flip it open 90° to align the base perfectly on an edge or corner. Flip it out all the way and you can put it in a corner to accurately measure diagonals. Otherwise, the width of the base would prevent you from getting all the way into the corner, rendering the measurement inaccurate.
Height Tracking: "Real time" height tracking for situations where you can hit a reflective target (like the ground) on the low end, but not at the top. Perfect for measuring the height of an overhead wire, for example.
Timer: Set a timer to delay a measurement the same way you would with the shutter on a digital camera.
Accurate to 1/16 of an inch: That's right:A sixteenth of an inch! Take out a pair of earbuds. Look at how wide the 1/8" jack is. Now divide that by half.
AND MORE! Area/Volume, Diameter, Painter Function, Sloped Object Measurement, Trapezium Function, 4x Zoom Pointfinder Camera, Bluetooth Smart (4.0), Personalize Favorites, Smart Horizontal Mode, Triangle/Room. Building Information Modeling (BIM), Memory Stores 30 Displays, Pythagorean Function, Stake Out Function, Add & Subtract, Height Profile Tracking, Min/Max Function, and Single Measurement 660 ft Range
ISO 16331-1 Certified Typical Measuring Accuracy: ± 0.04"
ISO 16331-1 Certified Typical Measuring Range: up to 660 ft
Measuring Units: 0.000 m, 0.0000 m, 0.00 m, 0.00 ft, 0'00" 1/32, 0.00 in, 0 in 1/32
Power Range Technology
Distance in m: 10, 50, 100 m
Ø of the laser dot in mm: 6, 30, 60 mm
Tilt Sensor Measuring Range: 360°
Pointfinder with 4x Zoom
Memory: Last 30 displays
Window Software: DISTO Transfer with AutoCAD plugin
Data Interface: Bluetooth V4.0 Smart
Measurements Per Set of Batteries: up to 5000 (with Li-iron LFP batteries)
Multifunction End-Piece: Automatic Recognition
Batteries: type AA 2 × 1.5 V (Ships with Li-ion rechargeable)
Tripod Thread: ¼”- 20
Protection Class: IP65 - water jet protection and dust-tight