The newest take on the classic Leica DISTO D2. Now with Bluetooth, a fully integrated intelligent endpiece, a bright white display and an ISO certified measuring engine that drives 1/16" accuracy and 330 foot measuring range.
The Leica DISTO D2 is a 7 measurement mode Laser Distance Meter (LDM) accurate to 1/16 of an inch. It features an intuitive back-lit LCD display in a 4oz package that is small enough to fit in your pocket.
Use Bluetooth to send measurements into apps running on mobile devices.
The D2 measures from its base by default and can be configured to measure from the front.
Flip out the intelligent endpiece to 90º to hook onto outside corners or extend the endpiece fully for inside corners. The D2 will automatically measure from the end of its flip-out endpiece when fully extended. Combined with the Min/Max function, the endpiece allows you to get the tool all the way into corners for accurate diagonal measurements.
The D2 calculates area and volume, and remembers the last 10 measurements taken. Use the Add/Subtract capability to combine measurements to get a precise reading of the total wall area of a room (aka "the painter function").
The D2 includes a Pythagoras function for indirect height or width measurements. However, in a tool this size that cannot be mounted to a tripod we recommend using the Pythagoras for estimates or rough measurements. If you need precise indirect measurements, an LCM with a tilt sensor is your best bet.
Features and Functions
Intelligent Endpiece: The endpiece is an integral part of the tool, connected to the circuit board. In the closed position the DISTO know to measure from its base. Flip it open 90° to align the base perfectly on an edge or corner. Flip it out all the way and you can put it in a corner to accurately measure diagonals. Otherwise, the width of the base would prevent you from getting all the way into the corner, rendering the measurement inaccurate.
Stake Out Function: The stake out function uses the continuous measurement mode to indicate where to place stakes along a stake-out line. Ideal for any situation where you need to place objects at a consistent interval. The display shows the distance to the next stake out point and the DISTO beeps as you approach it.
Painter Function: When the DISTO is in area or volume mode, you can use the add/subtract function to total the area of several surfaces, or subtract an area, such as a door for example, from a measurement.
AND MORE! Add & Subtract, IP54, Area/Volume, Min/Max Function, Bluetooth Smart (4.0), and Pythagoras Function
Typical Measuring Accuracy: 1/16” / ± 1.5 mm
ISO 16331-1 Certified Range: up to 330 ft
Measuring Units: 0.000 m, 0.00 ft, 0'00" 1/16, 0 in 1/16